Torsion Spring Replacement in Lombard, IL
Torsion springs mount horizontally on a steel shaft directly above a closed garage door and twist — rather than stretch — to store lifting energy. They’re the standard system on most doors built or replaced since the 1990s.
Local context for Lombard
Winters around Lombard bring real cold-weather stress on garage door springs and cables, a pattern seen consistently across colder parts of the country.
A torsion spring system consists of one or two springs wound tightly around a steel shaft that runs above the door opening, with cable drums at each end that spool the lift cables as the door rises. Instead of stretching like an extension spring, a torsion spring twists — winding tighter as the door closes and unwinding to release energy as the door opens. This design distributes weight evenly and is generally considered more durable and controllable than an extension-spring layout, which is why it’s become the standard on most doors manufactured in the last few decades.
Because the shaft and springs sit directly above the door opening, a torsion spring failure is unmistakable: a loud bang, a stuck or extremely heavy door, and sometimes a visible gap in the coil where the spring separated. Sizing a replacement torsion spring correctly requires the door’s exact weight along with the spring’s wire diameter, inside diameter, and length — get any of those wrong and the door will either strain the opener (spring too weak) or refuse to stay closed (spring too strong).
Torsion Spring Replacement problems we see in Lombard
Balance drift from freeze-thaw cycling
Repeated freeze-thaw cycles can gradually affect door balance and spring tension, a common reason for a balance/tension adjustment in winter climates.
Cable and hinge cold-brittleness
Along with springs, lift cables can also become more brittle in extreme cold, increasing the chance of sudden failure alongside a spring.
Cable drums appear loose or the cable has slipped
Torsion drums work with the spring to spool cable evenly; wear or a spring failure can knock a drum out of alignment.
Visible separation in the spring coils
A clean gap between coils on the shaft confirms the spring has already snapped, even if the door hasn’t been operated since.
Frequently asked questions
Is broken garage door spring repair available in Lombard?
Garage Door Spring Repair Co is expanding market by market across Illinois. Submit a request through this page or call us directly to check current local availability in Lombard.
Can one torsion spring be replaced without touching the other?
On a two-spring shaft, most technicians recommend replacing both at the same time even if only one failed, since they were installed together and are typically near the same point in their cycle life — replacing only one often leaves the door slightly unbalanced going forward.
How is a torsion spring different from an extension spring?
A torsion spring is mounted horizontally on a shaft above the door and stores energy by twisting; an extension spring is mounted above the horizontal tracks on either side of the door and stores energy by stretching. Torsion systems are the more common modern standard and are generally regarded as more durable and controllable.