Extension Spring Replacement in Bedford, MA
Extension springs run above the horizontal tracks on either side of the door and stretch — rather than twist — to store lifting energy. They’re common on older garage doors and lighter-duty installations.
Local context for Bedford
Bedford sees genuinely cold winters, and cold temperatures are one of the most common real-world causes of garage door spring failure — metal contracts and becomes more brittle under sustained cold, which is why broken-spring calls spike locally in winter months.
Extension spring systems use a spring mounted above each horizontal track that stretches as the door closes and contracts to help lift the door as it opens, working through a pulley-and-cable system that redirects the force downward to the door itself. This design was the standard for decades before torsion systems became more common, and it’s still found on many older homes and some lighter residential doors today.
Because an extension spring stores energy by stretching rather than twisting on a fixed shaft, a snapped extension spring can become a projectile if it isn’t restrained — which is exactly why safety cables (a thin cable that runs through the center of the spring, anchored at both ends) are considered essential on any extension-spring door. A door with extension springs but no visible safety cables is a real hazard and worth flagging to a technician even before a spring actually fails.
Extension Spring Replacement problems we see in Bedford
Frozen door-bottom seal adding spring load
In freezing conditions, a bottom seal frozen to the driveway can force the spring to work against extra resistance when the door opens, a common cold-climate stress factor.
Ice and snow interference near the spring assembly
Accumulated ice or snow at the base of the door can add extra resistance the spring has to work against, a common winter service call.
No visible safety cable through the spring
A missing safety cable means a snapped extension spring has nothing to restrain it, creating a real projectile hazard — this should be corrected regardless of whether the spring has failed yet.
Rust or corrosion along the spring coils
Extension springs mounted near the tracks are exposed to more moisture and debris than shaft-mounted torsion springs, making corrosion a common failure driver.
Frequently asked questions
Why do garage door springs break more often in winter near Bedford?
Cold temperatures make spring metal more brittle, which is why sudden spring failure is a common winter service call in and around Bedford and other colder-climate areas.
How do I know if my garage door has torsion or extension springs?
Torsion springs are mounted on a horizontal shaft directly above the closed door. Extension springs run above the horizontal tracks on either side of the door, roughly parallel to the ceiling. If you see long springs running along the tracks rather than a single shaft above the door, it’s an extension system.
Are extension springs less safe than torsion springs?
Extension springs aren’t inherently unsafe, but they do carry a specific risk if safety cables are missing: a snapped extension spring under tension can become a projectile. With properly installed safety cables, extension systems are a well-established, functional design that’s simply less common on newer doors than torsion systems.