Torsion Spring Replacement in Morrow, OH
Torsion springs mount horizontally on a steel shaft directly above a closed garage door and twist — rather than stretch — to store lifting energy. They’re the standard system on most doors built or replaced since the 1990s.
Local context for Morrow
Winters around Morrow bring real cold-weather stress on garage door springs and cables, a pattern seen consistently across colder parts of the country.
A torsion spring system consists of one or two springs wound tightly around a steel shaft that runs above the door opening, with cable drums at each end that spool the lift cables as the door rises. Instead of stretching like an extension spring, a torsion spring twists — winding tighter as the door closes and unwinding to release energy as the door opens. This design distributes weight evenly and is generally considered more durable and controllable than an extension-spring layout, which is why it’s become the standard on most doors manufactured in the last few decades.
Because the shaft and springs sit directly above the door opening, a torsion spring failure is unmistakable: a loud bang, a stuck or extremely heavy door, and sometimes a visible gap in the coil where the spring separated. Sizing a replacement torsion spring correctly requires the door’s exact weight along with the spring’s wire diameter, inside diameter, and length — get any of those wrong and the door will either strain the opener (spring too weak) or refuse to stay closed (spring too strong).
Torsion Spring Replacement problems we see in Morrow
Balance drift from freeze-thaw cycling
Repeated freeze-thaw cycles can gradually affect door balance and spring tension, a common reason for a balance/tension adjustment in winter climates.
Cable and hinge cold-brittleness
Along with springs, lift cables can also become more brittle in extreme cold, increasing the chance of sudden failure alongside a spring.
Loud bang directly above the closed door
The shaft-mounted torsion spring is positioned right above the door, so a failure is usually heard and felt at that specific location.
Visible separation in the spring coils
A clean gap between coils on the shaft confirms the spring has already snapped, even if the door hasn’t been operated since.
Frequently asked questions
Why do garage door springs break more often in winter near Morrow?
Cold temperatures make spring metal more brittle, which is why sudden spring failure is a common winter service call in and around Morrow and other colder-climate areas.
Can one torsion spring be replaced without touching the other?
On a two-spring shaft, most technicians recommend replacing both at the same time even if only one failed, since they were installed together and are typically near the same point in their cycle life — replacing only one often leaves the door slightly unbalanced going forward.
What tools are required to replace a torsion spring safely?
Properly sized steel winding bars (not screwdrivers or other improvised tools), a secure ladder, and vise grips or clamps to secure the shaft are the minimum safety equipment. This is why torsion spring work is almost universally left to trained technicians.